Cargando · Loading
Solutions by type
Industrial Ethernet switches, copper-to-fiber media converters, PTP/GNSS time servers, and ruggedized routing for critical infrastructure networks.
Products
Compact DIN-rail managed industrial switch: 8 or 4 RJ45 ports with 2-4 fiber SFP ports up to 2.5 Gbps, ITU-T K.44 surge protection, and optional PoE++ up to 90W per port.
Managed industrial switch with precision time synchronization: 4× 1/2.5/10 Gbps ports plus 8 or 16 RJ45/SFP ports, multi-constellation GNSS receiver, and PTPv2 profiles for power and telecom networks.
12/10-port managed industrial Ethernet switch with fiber SFP and copper up to 2.5 Gbps, up to 64 simultaneous G.8032 rings, and IEEE 1588v2 synchronization in DIN-rail format.
Layer 2+ managed switch in 19" 1U chassis: 4× 10 Gbps SFP+ slots plus up to 32 RJ45 ports, PoE up to 90W per port (500W total), and up to 64 ERPS rings for critical backbone networks.
Modular managed industrial switch with PTPv2 time server function: 19" 1U chassis with 8 hot-swap slots, up to 32 RJ45/SFP ports or 4× 10 Gbps SFP+ interfaces, PRP/HSR, and IEC 61850-3 certification.
Outdoor master clock with integrated 72-channel GNSS receiver: accuracy better than ±100 ns, PTP/SyncE/NTP, PoE power, and IP65 housing for direct antenna-side mounting.
Managed industrial time server with GNSS: ±40 ns accuracy, PTPv2/NTP/SyncE/ToD distribution, 4× 10 Gbps SFP+ slots, and -40°C to +85°C operation with 650,000-hour MTBF.
Managed network synchronization quality analyzer and GPS time server: GNSS reference better than ±15 ns, OCXO/DOCXO oscillators, up to 12 SFP+ slots, and 72-hour internal data logging.
Synchronization monitoring probe for 5G networks: measures the time and frequency quality demanded by the RAN (±1.5 µs), operates as a master clock with 40 ns typical error, and integrates with QuazarNet software.
Unmanaged Ethernet-to-fiber media converter with switch function: 1 gigabit RJ45 port plus 1 SFP slot, jumbo frames up to 10KB, LFPT, and -40°C to +85°C operation in a miniature format.
100 Mbps Ethernet-to-fiber converter with switch mode and optional PoE++ up to 90W: bridges copper networks with optical links in point-to-point topology, with surge protection and DIN-rail mounting.
Serial-to-fiber converter: carries RS-232/422/485 interfaces over single-mode or multimode fiber up to 60 km, in point-to-point or optical bus topology, with full immunity to electromagnetic interference.
Fiber optic multiplexer for serial communications: up to 4 RS-232/422/485 interfaces over one or two SM/MM/WDM/CWDM/DWDM optical links, supporting ring, bus, and point-to-point topologies.
Serial optical multiplexer with Profibus and Modbus support: two screw-terminal RS-232/422/485 interfaces over one or two fiber links, universal AC/DC power, and DIN-rail mounting.
Optical interface converter between two SFP modules: regenerates signal amplitude and converts wavelengths from 155 Mbps to 3.125 Gbps for SDH, Gigabit Ethernet, and ATM, with SNMP/web management.
Optical converter for power teleprotection signals: adapts 820/850/1310 nm interfaces of differential, distance, and overcurrent protection relays to MM/SM/CWDM/DWDM SFP links, with redundant power as standard.
Layer 3 router module for the Hyperion 500 switch: RIP/OSPF/BGP dynamic routing, IPSEC AES-256 encryption, up to 5 virtual routing engines (VRF), and L3 firewall with anti-DDoS protection.
Network management and monitoring platform for Bitstream and third-party devices: hierarchical domain grouping, alarm signaling, G.8032 ring monitoring, event logging, and automatic firmware updates.