Cargando · Loading
Sector parameters
The challenge
Peru's power grid operates under growing pressure: higher renewable energy penetration, transmission expansion toward remote areas, and regulatory demands for SEIN digitalization. Modern substations require IEC 61850 protocols, high-availability SCADA, and precise time synchronization to guarantee system stability. A communication failure between IEDs can lead to widespread outages or damage to high-value equipment. EMAR SYSTEMS integrates the communications, synchronization, and automation layer that converts legacy electrical infrastructure into interoperable digital assets.
Operational scenarios
01
Migration of legacy IEDs to modern protocols using Kalkitech Arc One gateways. Without replacing existing equipment: the gateway converts DNP3, Modbus, and IEC 104 to IEC 61850 GOOSE/SV, enabling full integration with SCADA and COES-SINAC control centers.
02
Line differential protection relays require synchronization <1 μs between remote substations. Bitstream's TS-3000 provides GPS/GNSS time with PTP, IRIG-B, and PPS outputs to ensure correct protection operation on 500 kV SEIN lines.
03
Bitstream industrial switches with MRP ring topology (recovery time <200 ms) and IEC 61850-3 support for harsh electrical environments. Operating temperature -40°C to +85°C for installation in unconditioned switchgear rooms.
04
Zetron MAX integrates P25/LMR radio, VoIP, GIS, and forensic logging in a single console for transmission and distribution operators. Maintenance crew dispatch, generator coordination, and real-time incident management with 99.999% availability.
Key capabilities
Products for this sector
20-watt high-power relay extending the TSM network range beyond 200 miles, with a MIL-STD-1275 military vehicle power interface for seamless integration.
Heavy-duty double tube mast offering twice the load capacity of the single tube version, ideal for multiple heavy antennas.
Manufacturers in this sector
TrellisWare
SpecializedResilient connectivity for distributed substations and smart grid
EE.UU. · View brand →
Rolatube
Tactical masts and elevation systems
Reino Unido · View brand →
Regulatory framework
Equipment certified per IEC 61850, IEC 62351 (power network cybersecurity), and MINEM/OSINERGMIN regulations for electrical installations. Support for SEIN modernization projects and compliance with COES-SINAC technical requirements for new facility connections.
Technical guide for migrating legacy IEDs to IEC 61850 in SEIN substations. Digitalization protocol without equipment replacement, IEEE 1588 time synchronization, and COES-SINAC compliance.
Analysis of SEIN digitalization state and the 2030 roadmap: massive renewable integration, IEC 61850 Edition 2, IEC 62351 cybersecurity, distributed generation, and the role of communications infrastructure.
Strategic-level mast reaching 8m and 10m heights, designed for long-range communications at brigade command posts.
Cost-effective instrument tripod derived from a military-spec design, offering 40kg load capacity in an ultra-compact format.
Modernized 900 MHz telemetry module designed as drop-in replacement for legacy industrial radios in oil & gas and utility infrastructure.
Rugged LTE+Wi-Fi mesh node for rapid network expansion where fixed infrastructure is unavailable, with dual 2×2 MIMO radios and 600 Mbps user throughput.
LTE-integrated Kinetic Mesh node combining cellular LTE backhaul with quad-radio 802.11ac mesh, delivering 2.3 Gbps aggregate in the same Peregrine ruggedized IP67 form factor.
Unified dispatch platform: P25/LMR radio, VoIP, CAD, GIS, and logging in a single interface. 99.999% availability for 24/7 operations.
Interoperability gateway between heterogeneous radio systems (analog, P25, DMR, TETRA). Connects legacy radio fleets with modern IP infrastructure.
IEC 61850 / DNP3 / IEC 104 / Modbus substation gateway. Converts legacy IEDs to modern protocols without equipment replacement. Certified for transmission SCADA integration.
IEC 61850 IED testing platform. GOOSE, SV, and MMS signal generation. Substation configuration validation before commissioning.
Italian-made wideband omnidirectional antenna by Polo Marconi for critical links in PMR networks, telemetry and air-traffic-control applications.
Digital mobile radio from the Xd family for vehicles: supports analog mode, DMR Tier II and DMR Tier III trunked, with integrated GPS and Bluetooth.
Compact, rugged DMR Tier II portable radio from the Xd family for field operations. Handheld complement to the SDM730 mobile.
High-density communications recording system: up to 240 simultaneous channels, full redundancy, and multi-site access. For large dispatch centers and 24/7 operations.
Resonant cavity duplexer for PMR repeater sites. Allows using a single antenna for simultaneous TX and RX with TX/RX isolation >90 dB.
ATEX Zone 1 certified Ex 'i' intrinsically safe communications system for operation in explosive gas and combustible dust zones. Full-duplex voice, industrial noise cancellation, Fischer connector.
Multi-channel alerting system for critical operations centers. Simultaneously activates P25 radios, paging, sirens, digital signs, and IP messaging with latency under 500 ms.
50W DMR Tier II/III base station with IP67 protection for unclimated remote sites. Compatible with Simoco SDM730 and SDP660 radios, AES-256 encryption, and GPIO for remote site monitoring.
High-selectivity VHF/UHF cavity combiner for sharing a single antenna between 2-8 transmitters. Insertion loss < 1.5 dB, > 60 dB port-to-port isolation, aluminum cavity design for installation at hard-to-access sites.
Analytics and asset management platform for electric distribution networks. Aggregates real-time data from multiple substations via IEC 61850/DNP3/Modbus, detects anomalies, optimizes DER dispatch, and provides power quality reports.
IEC 61968/61970 CIM integration gateway connecting heterogeneous SCADA, EMS, DMS, and GIS systems via an SOA service bus. Translates legacy data models (DNP3, IEC 60870, Modbus) to IEC CIM standard without modifying existing systems.
DMR Tier II/III portable radio certified ATEX Zone 1 and IECEx for underground mining, petrochemical plants, and refineries. AES-256, Bluetooth 5.0 for intrinsic safety headsets, 4W RF, integrated GPS, NFC for safety check-in.
High-Q cavity notch filter for rejection of interfering signals on towers with multiple transmitters. Rejection > 60 dB at notch frequency, adjustable rejection bandwidth from 25 to 200 kHz, insertion loss < 0.4 dB, 100W continuous power.
IEC 61850 conformance testing tool to validate standard implementation in IEDs, protection relays, and RTUs before commissioning. Generates conformance reports for KEMA/UL certification, simulates GOOSE and MMS failures, and validates manufacturer PIXIT/MICS model against the standard.
Multi-band combiner system for co-location of LTE 700/850 MHz, VHF 136-174 MHz, and UHF 380-512 MHz transmitters on a single site antenna. Inter-band isolation > 80 dB, insertion loss < 1.2 dB per band, 200W per port, modular 2 to 8 band configuration.
Compact DIN-rail managed industrial switch: 8 or 4 RJ45 ports with 2-4 fiber SFP ports up to 2.5 Gbps, ITU-T K.44 surge protection, and optional PoE++ up to 90W per port.
Managed industrial switch with precision time synchronization: 4× 1/2.5/10 Gbps ports plus 8 or 16 RJ45/SFP ports, multi-constellation GNSS receiver, and PTPv2 profiles for power and telecom networks.
12/10-port managed industrial Ethernet switch with fiber SFP and copper up to 2.5 Gbps, up to 64 simultaneous G.8032 rings, and IEEE 1588v2 synchronization in DIN-rail format.
Layer 2+ managed switch in 19" 1U chassis: 4× 10 Gbps SFP+ slots plus up to 32 RJ45 ports, PoE up to 90W per port (500W total), and up to 64 ERPS rings for critical backbone networks.
Modular managed industrial switch with PTPv2 time server function: 19" 1U chassis with 8 hot-swap slots, up to 32 RJ45/SFP ports or 4× 10 Gbps SFP+ interfaces, PRP/HSR, and IEC 61850-3 certification.
Outdoor master clock with integrated 72-channel GNSS receiver: accuracy better than ±100 ns, PTP/SyncE/NTP, PoE power, and IP65 housing for direct antenna-side mounting.
Managed industrial time server with GNSS: ±40 ns accuracy, PTPv2/NTP/SyncE/ToD distribution, 4× 10 Gbps SFP+ slots, and -40°C to +85°C operation with 650,000-hour MTBF.
Managed network synchronization quality analyzer and GPS time server: GNSS reference better than ±15 ns, OCXO/DOCXO oscillators, up to 12 SFP+ slots, and 72-hour internal data logging.
Synchronization monitoring probe for 5G networks: measures the time and frequency quality demanded by the RAN (±1.5 µs), operates as a master clock with 40 ns typical error, and integrates with QuazarNet software.
Unmanaged Ethernet-to-fiber media converter with switch function: 1 gigabit RJ45 port plus 1 SFP slot, jumbo frames up to 10KB, LFPT, and -40°C to +85°C operation in a miniature format.
100 Mbps Ethernet-to-fiber converter with switch mode and optional PoE++ up to 90W: bridges copper networks with optical links in point-to-point topology, with surge protection and DIN-rail mounting.
Serial-to-fiber converter: carries RS-232/422/485 interfaces over single-mode or multimode fiber up to 60 km, in point-to-point or optical bus topology, with full immunity to electromagnetic interference.
Fiber optic multiplexer for serial communications: up to 4 RS-232/422/485 interfaces over one or two SM/MM/WDM/CWDM/DWDM optical links, supporting ring, bus, and point-to-point topologies.
Serial optical multiplexer with Profibus and Modbus support: two screw-terminal RS-232/422/485 interfaces over one or two fiber links, universal AC/DC power, and DIN-rail mounting.
Optical interface converter between two SFP modules: regenerates signal amplitude and converts wavelengths from 155 Mbps to 3.125 Gbps for SDH, Gigabit Ethernet, and ATM, with SNMP/web management.
Optical converter for power teleprotection signals: adapts 820/850/1310 nm interfaces of differential, distance, and overcurrent protection relays to MM/SM/CWDM/DWDM SFP links, with redundant power as standard.
Fiber optic I/O signal multiplexer: carries 8 digital inputs, 8 relay outputs, and RS-232/422/485 serial interfaces with maximum 17 ms delay, for remote command and signaling between facilities.
Fiber optic multiplexer for packet traffic and voice: up to 4 Gigabit Ethernet streams and 8 or 16 E1 channels (G.703/704) over 1 or 2 line SFP ports, with redundant AC/DC supplies in a 19" chassis.
Control and measurement unit for facility supervision: logs temperature and humidity, detects intrusion and flooding, controls remote devices, and reports over Ethernet and 2G/3G/4G LTE cellular.
Input/output extension module for Setebos 2S and Hyperion devices: adds isolated dry-contact inputs, relay outputs, and DC voltage measurement, connected via RS485 or 1-Wire.
Layer 3 router module for the Hyperion 500 switch: RIP/OSPF/BGP dynamic routing, IPSEC AES-256 encryption, up to 5 virtual routing engines (VRF), and L3 firewall with anti-DDoS protection.
Network management and monitoring platform for Bitstream and third-party devices: hierarchical domain grouping, alarm signaling, G.8032 ring monitoring, event logging, and automatic firmware updates.
Peregrine platform optimized for licensed spectrum operation: secure, high-capacity kinetic mesh with up to 3.9 Gbps combined data rate — up to 6× the throughput of standard nodes — in regulated bands.
Rajant Corporation
SpecializedField connectivity for crews, remote substations, and SEIN modernization projects
EE.UU. · View brand →