Cargando · Loading
Sector
Communications and control for upstream, midstream and downstream in Peru
Sector parameters
The challenge
Oil, gas, and petrochemical operations demand the highest level of availability and security in communications: a failure in a pipeline control system or platform coordination can have catastrophic consequences. In Peru, transandean gas pipeline operations, upstream gas natural platforms, and national refineries require resilient networks operating in remote jungle, altiplano, and sea zones. ATEX Zone 0/1/2 regulations are mandatory in risk zones. EMAR SYSTEMS provides the communications, dispatch, and control infrastructure that guarantees uninterrupted operation.
Operational scenarios
01
Rajant BreadCrumb nodes in ATEX Zone 1/2 version provide IP connectivity on marine platforms and separation plants where conventional WiFi systems cannot be installed. The Kinetic Mesh network is tolerant to individual node failures: if one device fails, traffic is instantly rerouted through neighboring nodes.
02
Zetron MAX integrates UHF/VHF field radio, VoIP, SCADA telemetry, and supervisory video in a single console for pipeline operators. P25 and DMR protocols for communication with field crews, with forensic recording of all communications for OSINERGMIN regulatory compliance.
03
In midstream operations with multiple compression stations distributed over hundreds of kilometers, time synchronization is critical for event correlation. Bitstream's TS-3000 provides GPS time with <100 ns accuracy for remote stations without internet access, enabling reliable Sequence of Events (SOE) analysis.
04
Key capabilities
Resilient networks for mission-critical environments. Mesh radio, vehicle intercom, integrated hearing protection.
Advanced optics for 24/7 operations. Image intensification, thermal, multi-spectral fusion.
Battle management and integrated situational awareness. Command, control, communications, computers, intelligence, surveillance, reconnaissance.
Products for this sector
The bestselling tactical mast, offering an optimal balance of height, load capacity, and portability for squad-to-platoon level communications.
Modernized 900 MHz telemetry module designed as drop-in replacement for legacy industrial radios in oil & gas and utility infrastructure.
Manufacturers in this sector
Rolatube
Tactical masts and elevation systems
Reino Unido · View brand →
Rajant Corporation
SpecializedATEX Kinetic Mesh for offshore platforms and processing plants
EE.UU. · View brand →
Regulatory framework
ATEX IEC 60079 certified equipment for explosion risk zones (Zone 0, 1, and 2). Compliance with MINEM and OSINERGMIN regulations for hydrocarbon facilities. Support for Process Safety Management (PSM) audits and HAZOP evaluations. Integration with SIL-certified Emergency Shutdown Systems (ESD).
Communications network design for offshore platforms and FPSO vessels in 24/7 operation. Kinetic Mesh on metallic structure, Ex-certified intercoms, and voice recording for regulatory audits under API RP 14F.
Telemetry architecture for long-distance pipelines: RTUs at compressor stations, LTE/Mesh communications to central SCADA, and automatic failover on link failure, with a reference design for Andean-Amazonian pipelines.
sistemas de visión nocturna thermal camera systems for early detection of leaks, hot spots, and unauthorized activity in pipelines and refinery perimeters. Integration with the central control system for automatic alerts and real-time work order generation.
Rajant's ruggedized edge computing platform combining distributed compute, data management, and wireless connectivity (Wi-Fi 5, LTE/5G/LoRa) in an IP67 enclosure for autonomous edge operations.
Marine VHF antenna by Morad Antenna (Bellingham, WA) built in stainless steel and anodized aluminum — extended service life in extreme marine environments.
Morad Antenna wideband UHF vehicle antenna for tactical radios and mobile communications systems. Stainless steel construction, magnetic or bolt mount.
ATEX Zone 1 certified Ex 'i' intrinsically safe communications system for operation in explosive gas and combustible dust zones. Full-duplex voice, industrial noise cancellation, Fischer connector.
Compact DIN-rail managed industrial switch: 8 or 4 RJ45 ports with 2-4 fiber SFP ports up to 2.5 Gbps, ITU-T K.44 surge protection, and optional PoE++ up to 90W per port.
12/10-port managed industrial Ethernet switch with fiber SFP and copper up to 2.5 Gbps, up to 64 simultaneous G.8032 rings, and IEEE 1588v2 synchronization in DIN-rail format.
Modular managed industrial switch with PTPv2 time server function: 19" 1U chassis with 8 hot-swap slots, up to 32 RJ45/SFP ports or 4× 10 Gbps SFP+ interfaces, PRP/HSR, and IEC 61850-3 certification.
Serial-to-fiber converter: carries RS-232/422/485 interfaces over single-mode or multimode fiber up to 60 km, in point-to-point or optical bus topology, with full immunity to electromagnetic interference.
Fiber optic multiplexer for serial communications: up to 4 RS-232/422/485 interfaces over one or two SM/MM/WDM/CWDM/DWDM optical links, supporting ring, bus, and point-to-point topologies.
Serial optical multiplexer with Profibus and Modbus support: two screw-terminal RS-232/422/485 interfaces over one or two fiber links, universal AC/DC power, and DIN-rail mounting.
Fiber optic I/O signal multiplexer: carries 8 digital inputs, 8 relay outputs, and RS-232/422/485 serial interfaces with maximum 17 ms delay, for remote command and signaling between facilities.
Control and measurement unit for facility supervision: logs temperature and humidity, detects intrusion and flooding, controls remote devices, and reports over Ethernet and 2G/3G/4G LTE cellular.
Network management and monitoring platform for Bitstream and third-party devices: hierarchical domain grouping, alarm signaling, G.8032 ring monitoring, event logging, and automatic firmware updates.
Commercial-grade mesh node in an IP67 enclosure for IIoT and light-duty vehicles: dual 2.4 and 4.9/5 GHz transceivers with 2×2 MIMO, 455 grams, and power draw from 2.8W.
Ruggedized IP67 node with up to four transceivers and six antenna ports across 900 MHz, 2.4, and 5 GHz: Rajant's classic multi-radio platform for mesh backbone in large-scale operations.
Sparrow variant hardened against extreme vibration, intended for integration into mobile assets, heavy machinery, and embedded systems where continuous vibration would degrade a standard node.
Hybrid mesh + 5G node: two Wi-Fi 6 radios (2.4 and 5 GHz) plus an integrated 5G cellular modem with global band support, dynamically selecting the best path — mesh or cellular — for every packet.
The networking protocol that defines Kinetic Mesh: reroutes traffic in real time by dynamically choosing the fastest, most reliable path among all available links, with no controller node and no motion-induced interruptions.
Management and monitoring suite for BreadCrumb networks: real-time topology visualization, per-node status and metrics, centralized configuration, firmware updates, and security administration across the entire mesh.
Morad Antenna
SpecializedRobust antennas for offshore platforms and service vessels in hydrocarbon operations
EE.UU. · View brand →